Alto Desempenho E Temperatura Resistência Centrífuga Soprador (Modelo 4-68) Ventilação Ventiladores

Produto Descrição

4-68 centrífuga ventilador


4-68 centrífuga ventiladores (doravante referido para as ventiladores) pode ser usado para geral ventilação. Its service conditions are as follows:
1. Aplicação site: As the indoor ventilation of general factories and large buildings, it can be used as both input gas and output gas.
2. Tipos de gás para ser transportado: ar e outros gases que são não espontânea combustão, inofensivo para o corpo humano, e não corrosivo para aço materiais.
3. Impurezas em o gás: lá deve ser não viscosas substâncias em o gás, e o poeira e duro partículas contidas em o gás não excede 150 mg/m3.
4. The temperature of gas shall not exceed 80 ºC.  


2. Fan type:
1. The fan is single suction, and the machine numbers are № 2.8, 3.15, 3.55, 4, 4.5, 5, 6.3, 8, 10, 12.5, 16, 20, etc.
2. Each type of fan can also be made into two types right rotation or left rotation. When viewed from one end of the motor, the impeller rotates clockwise, which is called the right rotation fan, which is represented by "right". counterclockwise, which is called left rotation fan, and is represented by "left".
3. O outlet position of the fan is expressed by the outlet angle of the casing. Both "left" and "right" can be made into 0o, and 45o, such as 135o, 180o, and 225o.


3. Estrutural características de principal componentes
№ 2.8-5 of 4-68 fan is mainly composed of an impeller, casing, air inlet, and other parts equipped with a direct-connected motor. № 6.3-20 has a transmission part in addition to the above parts.
1. Impulsor: It é composto de 12 inclinado para trás em forma de asa lâminas soldado entre o cone único roda tampa e a placa-plana roda disco. São todos feitos de aço placas e foram calibrados por estático e dinâmico equilíbrio, com bom ar desempenho, alto eficiência, e estável operação.
2. Casing: the casing is a volute formed by welding ordinary steel plates. The casing is made into two different types. № 2.8-12.5 casing is integral and cannot be disassembled. № 16 and № 20 casings are made into three open types, and the upper part is divided into two parts along the vertical centerline, in addition to sendo dividido em duas partes ao longo o horizontal plano de o dividido, que são conectados por parafusos.
3. Air inlet: it is made into a converging streamlined integral structure and fixed on the inlet side of the fan with bolts.
4. Drive group: composted of main shaft, bearing box, rolling bearing, pulley or coupling, etc. The spindle is made of high-quality steel. № 6.3-12.5 fans of four unit numbers are of integral structure, with a thermometer and oil pointer installed on the bearing. № 16 and № 20 fans of two unit numbers are equipped with two parallel bearing blocks, with thermometers installed on the bearing block and lubricated with bearing grease.4-68



 

Produto Parâmetros

 

 

Tabela de desempenho parâmetros de 4-68 tipo NO. 4A, 4.5A e 5A

Velocidade r/min Flow m3/h   4 A 2900 1 2 3 4 5 6 7 2069 2059 2010 1931 1794 1627 1431 3984 4534 5083 5633 6182 6732 7281 82.3 86.2 88.9 90.0 88.6 83.6 78.2 2.78 3.01 3.19 3.36 3.48 3.64 3.70 3.34 3.61 3.83 4.03 4.18 4.37 4.44 Y112M-2 4 4 A 1450 1 2 3 4 5 6 7 519 509 500 480 451 402 353 1992 2267 2542 2816 3091 3366 3641 82.3 86.2 88.9 90.0 88.6 83.6 78.2 0.35 0.37 0.40 0.42 0.44 0.45 0.46 0.53 0.56 0.60 0.63 0.66 0.65 0.69 Y802-4 0.75 4.5 A 2900 1 2 3 4 5 6 7 2657 2628 2569 2461 2294 2069 1833 5790 6573 7355 8137 8920 9702 10485 83.3 87.0 89.5 90.5 89.2 84.5 79.4 5.13 5.51 5.86 6.15 6.37 6.60 6.72 5.90 6.34 6.74 7.07 7.33 7.59 7.73 Y132S2-2 7.5 4.5 A 1450 1 2 3 4 5 6 7 666 657 637 617 568 519 460 2895 3286 3678 4069 4460 4851 5242 83.3 87.0 89.5 90.5 89.2 84.5 79.4 0.64 0.69 0.73 0.77 0.79 0.83 0.85 0.90 0.97 1.02 1.08 1.11 1.16 1.19 Y90S-2 1.1 5 A 2900 1 2 3 4 5 6 7 3314 3265 3187 3049 2844 2589 2304 8050 9123 10197 11270 12343 13416 14490 84.2 87.6 90.0 91.0 89.8 85.3 80.5 8.80 9.44 10.03 10.49 10.86 11.31 11.52 10.12 10.86 11.53 12.06 12.49 13.01 13.25 Y160M2-2 15 5 A 1450 1 2 3 4 5 6 7 823 813 794 764 715 647 578 4025 4562 5098 5635 6172 6708 7245 84.2 87.6 90.0 91.0 89.8 85.3 80.5 1.09 1.18 1.25 1.32 1.37 1.41 1.45 1.42 1.53 1.63 1.72 1.78 1.83 1.89 Y100L1-4 2.2

 

6.3 D 1450 1 2 3 4 5 6 7 1323 1304 1274 1216 1137 1039 921 8320 9393 10467 11540 12614 13678 14761 84.8 88.1 90.5 91.4 90.2 85.9 81.3 3.61 3.86 4.09 4.26 4.42 4.60 4.65 4.42 4.73 5.01 5.22 5.41 5.63 5.69 Y132S-4 5.5 6.3 D 960 1 2 3 4 5 6 7 578 568 558 529 500 451 402 5508 6219 6930 7641 8351 9062 9773 84.8 88.1 90.5 91.4 90.2 85.9 81.3 1.04 1.11 1.19 1.23 1.29 1.32 1.34 1.38 1.47 1.58 1.63 1.71 1.75 1.78 Y112M-6 2.2 8 D 1450 1 2 3 4 5 6 7 2157 2118 2059 1971 1842 1676 1500 17585 19783 21982 24179 26378 28576 30774 85.7 88.8 91.0 91.9 90.8 86.7 82.4 12.29 13.10 13.81 14.40 14.87 15.35 15.56 14.4 15.4 16.2 16.9 17.4 18.0 18.3 Y180M-4 18.5 8 D 960 1 2 3 4 5 6 7 941 931 902 863 804 735 657 11643 13098 14553 16009 17464 18919 20375 85.7 88.8 91.0 91.9 90.8 86.7 82.4 3.55 3.82 4.01 4.17 4.30 4.46 4.51 3.55 3.82 4.01 4.17 4.30 4.46 4.51 Y132M2-6 5.5 8 D 730 1 2 3 4 5 6 7 549 539 519 500 470 421 382 8853 9960 11067 12173 13280 14387 15403 85.7 88.8 91.0 91.9 90.8 86.7 82.4 1.55 1.65 1.76 1.84 1.91 1.94 2.00 2.1 2.2 2.3 2.4 2.5 2.57 2.7 Y132M-8 3

 

10 D 1450 1 2 3 4 5 6 7 3442 3363 3265 3108 2922 2678 2422 35420 39713 44006 48299 52593 56886 61179 87.6 90.3 92.2 93.0 92.0 88.5 84.7 38.6 41.1 43.3 44.8 46.4 48.0 48.6 45.3 48.2 50.8 52.6 54.4 56.3 57.0 Y250M-4 55 10 D 960 1 2 3 4 5 6 7 1510 1480 1431 1363 1274 1176 1059 23450 26293 29135 31978 34820 37662 40505 87.6 90.3 92.2 93.0 92.0 88.5 84.7 11.2 12.0 12.6 13.0 13.4 13.9 14.1 13.1 14.1 14.8 15.3 15.7 16.3 16.5 Y200L1-6 18.5 10 D 730 1 2 3 4 5 6 7 872 853 823 784 735 676 617 17832 19993 22155 24316 26478 28639 30801 87.6 90.3 92.2 93.0 92.0 88.5 84.7 4.9 5.2 5.5 5.7 5.9 6.1 6.2 5.8 6.1 6.5 6.7 6.9 7.1 7.3 Y160L-8 7.5 12.5 D 960 1 2 3 4 5 6 7 2353 2304 2235 2128 2000 1833 1657 45800 51353 56904 62456 68008 73559 79111 87.6 90.3 92.2 93.0 92.0 88.5 84.7 34.20 36.40 38.32 39.69 41.07 42.33 42.99 40.13 42.71 44.97 46.58 48.19 49.67 50.45 Y280M-6 55 12.5 D 730 1 2 3 4 5 6 7 1363 1333 1294 1235 1157 1059 961 34828 39050 43271 47492 51714 55936 60157 87.6 90.3 92.2 93.0 92.0 88.5 84.7 15.05 16.02 16.87 17.52 18.06 18.59 18.96 17.66 18.80 19.80 20.56 21.19 21.18 22.25 Y225M-8 22

 



 

 

 

 

 

 

 

 

1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Produto placa de identificação principalmente inclui o conteúdo de o equipamento: principal técnico parâmetros (fluxo, pressão, motor potência, Revoluções Per Minuto), produto número, fabricação data, e so on, qual é conveniente para usuários para verificar at qualquer tempo
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.



 

 

Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators
  

 

 

Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience

Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.

 

In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.

Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing

 

 

When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging

The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator.

 

 

A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.


A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.


A. TT 40 percent AS THE ADVANCE PAYMENT AND TT 60 percent AFTER INSPECTION BEFORE SHIPPING.
B. 100 percent IRREVOCABLE L/C AT STGHT.


A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.





A. 10-15 Days if you need it urgently, we can discuss it for shorting time.

 

 
Tel: plus 86 13806434669
Fax: plus 86-533-6069989
Cellphone: plus 86 13806434669
Email:fan@hengdingfan.com

Tag: high performing and temperature resistance centrifugal blower (model 4-68) ventilation fans, China, manufacturers, suppliers, factory, price, for sale, CE certification, fã de mineração para mineração sustentável, Conformidade dos fãs de caldeiras, fã de mineração para expansão de minas, Aquecimento do ventilador da caldeira, Eficiência do ventilador do túnel, fã de mineração com controle remoto